Synthesis Design+BuildSynthesis Design+BuildSynthesis Design+BuildSynthesis Design+Build
  • home
  • about
  • services
    • exhibitions
    • interiors
    • displays
    • centre essentials
  • contact
  • home
  • about
  • services
    • exhibitions
    • interiors
    • displays
    • centre essentials
  • contact

Interiors

Concept to Completion

Synthesis Design + Build is a registered commercial builder and designer specialising in the development of interiors for retail, showrooms, workspaces or hospitality.

Synthesis can assist with the following services to showcase your products and/or maximise your workspace efficiency:

+  Master planning
+  Floor plans
+  Design & development
+  3D design modelling
+  Build documentation
+  Furniture and fit out
+  Colours and finishes
+  Installation and logistics
+  Trade coordination
+  Project management

exhibitions
displays
Synthesis Design + Build

Synthesis are specialist designers and builders of museum, gallery, trade & consumer exhibitions, retail interiors, shopping centre and point of sale displays.

Follow us on Instagram
Temporary walls to provide introduction, a place t Temporary walls to provide introduction, a place to exhibit or reconfigure a space. The temporary wall system has been a service provided by Synthesis for more than three decades. Our temporary walls offer free standing, self-supporting, engineered solutions where permanent walls cannot be installed.  Temporary walls are also a sustainable alternative to the traditional stud and plaster walls that can not be deinstalled or repurposed at the end of a project.

A recent project featuring our custom designed and produced temporary walls is ‘Aftershocks: Nolan and the Holocaust’ at the Melbourne Holocaust Museum. The exhibition showcases a series of raw, emotive works by celebrated Australian artist Sidney Nolan.

The exhibition is showing until 2 August 2025.

Exhibition developed by the Sydney Jewish Museum. 

Research and Curation: Katharine Cousins
Exhibition Producer: Dr Breann Fallon
Exhibition Design : @space_arrangers
Graphic Design: @studio_tweed
Artwork Installation: @markgaleaart
Exhibition build, temporary walls, graphics and banners: @synthesis_designbuild
Photography: @simonshiffsays
State Library Victoria | Make Believe – Encounte State Library Victoria | Make Believe – Encounters with Misinformation ~ Synthesis is proud to share our work recently completed for Make Believe, an exhibition exploring how human choices, psychology and biases contribute to the spread of misinformation.

As principal builder, Synthesis was responsible for the full scope of works, including the de-installation of the previous exhibition-built form, resolution of build methodology, production design, building permit documentation & compliance, engineering coordination, off-site fabrication, delivery, and final installation.

The exhibition, designed by Studio Peter King, required Synthesis to deliver a range of bespoke joinery and built-form elements including:

✳️ A 6m wide x  3.6m high mirror wall at the rear of the gallery.

✳️ Custom-designed seating, incorporating a reproduction of the heritage column skirting within the Keith Murdoch Gallery, featuring highly detailed upholstery in a combination of suede and custom-printed fabrics.

✳️ An overhead space frame spanning the full width and length of the gallery, housing both exhibition lighting and power infrastructure for integrated screens — an essential component of the exhibition’s immersive environment.

✳️ Temporary partition walls to create four distinct rooms within the gallery, each representing a key thematic element of the exhibition.

✳️ Projector rails and AV support joinery.

All works were successfully delivered and installed within the heritage-listed Keith Murdoch Gallery without disruption to the State Library’s daily operations or visitor experience.

Thanks to the SLV exhibition team for the opportunity to help bring the Make Believe exhibition to life.

Make Believe is a free exhibition, open daily until 26 January 2026

Curators:  Linda Short & Georgia Goud
Exhibition Producers:  Sam McKinnon & Nickk Hertzog
3D Exhibition Design: @studiopeterking
Exhibition Lighting: @megslighting
Build methodology, construction, installation: @Synthesis_designbuild
Wall & column painting: @flys_alone_painting
Wallpaper: @decentlyexposed
Upholstery: @uliks_furniture_
Exhibition images: @peterfosterphoto courtesy of SLV
Build Images: Synthesis
Yarra Ranges Regional Museum | A Toast to Melba ~ It has been wonderful to support Yarra Ranges Regional Museum once again with custom graphic elements and joinery.  A Toast to Melba shares rarely seen objects, photographs, and personal treasures from Coombe Yarra Valley, Arts Centre Melbourne, and Yarra Ranges Regional Museum—brought together for the first time in this dynamic new exhibition.

Thanks again to the YRRM exhibition team for the opportunity to assist you on this project.

Photo - Sean Paris Photography

#atoasttomelba #yrrmuseum
#damenelliemelba #coombeyarravalley
#artscentremelbourne #lilydale
#coldstream #melba #yrrm
#yrrmuseum #coombecottage
#exhibition #showcases
#customjoinery
@coombeyarravalley
@artscentremelbourne
@yrcouncil
Flashback Friday: Curved, carved, and complex ~ Ev Flashback Friday: Curved, carved, and complex ~ Every project leaves lasting memories and enables us to deliver better outcomes for future projects.  The project pictured here was a hand sculptured relief panel installed into a new cinema development in Richmond, Victoria, in the early 2000s. 

Today, 25 years later, the design, development, templating, carving, coating, and polishing techniques used in this project remain relevant and are still utilised in our processes. This project presented unique challenges, especially with the intricate curves that needed to align perfectly with the joinery, ceiling, and wall contours. To address this, we developed an innovative templating method, which we incorporated into early 3D CAD/CAM modelling systems. This approach continues to be a vital part of our work, ensuring that we can achieve seamless integration between new and existing complex curved contours.

The final result was an installation that appeared as a single, flawless piece of polished brass.

With each project comes experience and knowledge, we learn about new materials, create new production methods, and work out how to solve problems we didn’t even know we had. As we enter our 37th year in operation, we take pride in the thousands of projects we've successfully completed.

#beenaroundawhile
#stillhere
#doingwhatwelove
Melbourne Holocaust Museum – Underground: The Hi Melbourne Holocaust Museum – Underground: The Hidden Archive of the Warsaw Ghetto ~ Synthesis recently had the privilege of completing the build for Underground, an exhibition of rare artefacts from the hidden archive of the Warsaw Ghetto, on display for the first time outside of Europe.

The Synthesis scope of work encompassed the off-site production of all joinery, including a suite of handcrafted solid timber-framed, free-standing display furniture and forms meticulously assembled without any visible fixings. Once the joinery frames were installed, they were painted and wrapped in fabric. Custom showcases and graphics by Synthesis were then fixed to the joinery, completing the installation of built form.  Additionally, lightboxes, free-standing showcases, and display walls were designed, manufactured, and installed by Synthesis  to support and complement the exhibition story.

Thank you to the MHM exhibition team for entrusting Synthesis to help bring the exhibition to fruition.

The exhibition is currently on display until 30 March 2025. 

For a full list of exhibition credits and further information, please see https://mhm.org.au/underground/

3D Exhibition Design: Space Arrangers
2D Design:  Studio Tweed
Build methodology, production design, off-site construction, installation, signage and graphic production, showcases and finishing, and photos 4 - 6: @Synthesis_designbuild

Photographs 1 - 3: @simonshiffsays
Science Gallery Melbourne | SCI-FI: Mythologies Tr Science Gallery Melbourne | SCI-FI: Mythologies Transformed offers fresh insights on science fiction, a genre built on envisioning alternative futures and imaginary realms. The lines connecting science fiction with ancient philosophy and mythologie s are brought to light through the work of Asian and First Nations women artists and collectives.

The Synthesis team was contracted to complete the built form scope for the SCI-FI: Mythologies Transformed exhibition including design and development of the engineered 7.5m x 7.5m floor structure and elements to support the Red Silk of Fate installation. Custom LED lighting baffles were created for use throughout the exhibition in addition to semi-circular plinth joinery, a custom seating and display library fixture for the reading zone (complete with old school fat back TV and DVD player) and freestanding, internally illuminated plinths and showcases.  The exhibition built form also included many re-purposed elements of joinery, seating and tables from previous Synthesis exhibition builds and installations at SGM. 

Thanks once again to the Science Gallery Project Team and Curators for entrusting Synthesis with helping to bring the Sci-Fi exhibition to life. 

The exhibition reopens to the public from 19 Feb 2025. 

Exhibition Design: Sibling, Forde + Nicol, Napp Studios
Images 1 & 4 -  Matthew Stanton
Images 2, 3 & 5 - Synthesis Design + Build
Images 6 & 7 - Phoebe Powell
Contact

A:13 Newcastle Rd, Bayswater VIC
E: solutions@synthesis.com.au
P: 03 9720 3895

Connect
Copyright 2025 - Synthesis Design+Build
Website designed by 2dog creative